Research Digital Metallurgical Microscope                      

Model：DMM-01

I. Applications

Metal surface inspection/analysis

PCB section analysis

Particle granularity analysis

Chip defect analysis

LCD/LED circuit, COG detection

Fiber recognition

Mineral identify

 

This system,  can meet the needs of general quality inspection and evaluation, has the good cost performance and expansibility, which is your ideal solutions.

 

II. Specifications (optical magnification: 50X - 500X)

1. The eyepiece (optional)

WF10 x wide field and 16mm diameter of field of view 

WF20 x wide field and 8.5mm diameter of field of view

Flat field 10x eyepiece with scale (0.1 mm scale value)

 

2. The objective:

Flat field achromatic objective  numerical aperture NA

PL5x                           0.12

PL10x                         0.25

PL25X                        0.40

PL40x                         0.65

 

3. Trinocular eyepiece slide:

Rotation type, tilting 30 °

 

4. Coaxial coarse and fine focus adjust device:

Focus Adjusting range: 15mm   Fine adjust value 2 u m

 

5. Mechanical stage:

Y-direction moving range: 50mm  X-direction moving range: 70mm

 

6.Lighting source:

6v20w halogen lamp, brightness is adjustable

 

7. Polarizing device:

Insertable polarizer and vertical illuminator can not only make general metallographic analysis, particle analysis and test, but also inspect the opaque objects.

 

8. Colour filter:

Blue, yellow, green, grinding

 

III. Configuration

Microscope body+ image process module

 

IV. Optional accessories

1. 1.3million pixels ~ 5.0 million digital imaging system